The operation method of the double-sided machine cover cloth of the single-sided machine

Double-sided machine covering :(1) Preparation work: First, withdraw the active yarn feeding device from operation; Secondly, open all the closed needle tongues. Thirdly, remove all loose and loose yarn ends to make the fabric completely clean and fresh. (2) Threading work :(1) The yarn is introduced into the needle hook through each yarn guide and pulled to the center of the syringe; (2) After each yarn has been threaded through the needle hook, all the yarns are bundled together. Under the premise of feeling that the tension of each yarn is uniform, the yarn bundle is knotted, and the yarn joints are passed through the winding shaft of the fabric winding machine and tightly bound onto the fabric winding roller. (3) Slowly (or manually) jog the equipment to check if all the knitting needles have opened their tongues and if the yarn feeding is normal. If necessary, use a brush to assist in feeding the yarn. (4) Weave the fabric at a low speed. When the fabric is long enough, install the spreading frame and evenly pass the fabric through the winding shaft of the winding machine to quickly discharge the fabric. (5) After the equipment is weaving normally, let the positive yarn feeding device participate in the co-weaving.(6) Check the quality of the fabric surface. If there are no problems, start the machine normally. In this way, the fabric covering for the double-sided machine and the single-sided machine is completed.